911 Carrera Cabriolet (997) F6-3.6L (2007)
Convertible Top Weatherstrip: Service and Repair
Removing And Installing Seal For Cowl Panel Frame
Preliminary work
1. Remove front roof trim panel. Refer to Removing and installing front roof trim panel
2. Remove A-pillar trim panel on the left and right. Refer to Removing and installing A-pillar trim panel
Removing seal for cowl panel frame
1. Unscrew fastening screw -1- and pull off rubber seal for door -2- on the left and right as far as the door hinge.
2. Drill out rivets -1- from the integrated sheetmetal strips of the seal for the cowl panel frame -2- on the left and right using a 4 mm drill bit.