911 Carrera Cabriolet (997) F6-3.6L (2007)
2. Push motor for front vertical adjustment -3- onto the drive shaft by twisting slightly and secure with the two fastening screws -2-. -] Tightening
torque: 7 Nm (5 ftlb.)
3. Attach connector -1- to motor for front vertical adjustment -3- until it engages firmly.
Installing control unit for memory seat adjustment with support
1. Attach the three connectors on the control unit for memory seat adjustment until they are felt to engage.
2. Position control unit for memory seat adjustment with support -2- on seat frame and secure with both fastening screws -1-.
Subsequent work
Install front seat. Refer to Removing and installing front seat
Removing and Installing Motor For Lumbar Support
Removing And Installing Motor For Lumbar Support