911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-557003.png)
4. Clean the levelling and centering surfaces on the brake disc and wheel hub. Then apply a very thin coat of Optimoly TA to the centering surface on
the wheel hub.
5. Fit the brake discs. Do not confuse the right and left brake discs (except for Carrera/Carrera 4 with standard brake system in which both parts are
the same).
6. Engage the parking-brake cable at the parking-brake lever.
7. Adjust the parking-brake shoes 468316 Adjusting the parking-brake shoes.
Subsequent work
1. Fit the brake calliper. Tighten new fastening screws to 85 Nm/63 ftlb. (refer to Spare Parts Catalogue to find out which screw length to use).
Ensure that the brake hose and brake line are positioned perfectly.
2. Fit rear wheels.
