911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-231007.png)
Caution: Crankcase half 4-6 incorrectly levered off
^
Damage to pistons, piston rings
-> Lever off crankcase half 4-6 only with the help of a second person.
8. Carefully lever off crankcase half 4-6 with the help of a second person to avoid damaging the pistons (e.g. by tilting). Remove old shaft seals.
9. For the following steps, fasten the gear carrier to crankcase housing half 1-3 with two cylinder-head screws using spacer sleeves 9613. ->
Tightening torque: 15 ftlb.
Removing pistons, side 4-6
10. Lever off the front piston-pin circlips of marked pistons 4-6 (from the viewpoint of the drive belt side) using a small screwdriver, push out the
piston pin -arrow- and remove the pistons one by one. Assign the piston pins again to the appropriate pistons.
