911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-231011.png)
4. Insert new piston-pin circlip in the taper of the assembly aid 9603/1. Position the cylindrical part on the assembly tube of the special tool assembly
tool 9602/1.
5. Press circlip into assembly tube using the assembly aid 9500/3.
6. Position assembly tube on piston eye and press piston-pin circlip into the ring groove using the pressure pin assembly tool 9602/1. The circlip
must audibly engage.
