911 Carrera Cabriolet (997) F6-3.6L (2007)
Engine Oil Filler / Breather Cap: Service and Repair
WM 171519 Removing and installing oil filler neck
Preliminary work
Preliminary work
1. Disconnect battery.
2. Remove air cleaner housing. To do this, unclip the oil filler neck upwards out of the air cleaner housing -arrow-.
3. Release drive belt.
4. Detach fastening screws for generator -arrows-. Unscrew the longer screw -1- by approx. three turns, then undo the front pilot bushing by tapping
lightly on the screw head (use a plastic hammer). Unscrew screw and remove with deflection roller.
5. Unscrew the fastening screws -3- for the vacuum modulator on the intake distributor.