911 Carrera Cabriolet (997) F6-3.6L (2007)
15. Check sealing rings on servo-tank and replace if necessary. Fit servo-tank by carefully inserting the tank into the opening of the servo pump and
fastening the bayonet lock in the clockwise direction. Fit fastening screw of servo-tank to intake distributor - Tightening torque: 7.5 ftlb. Fill
servo-tank with Pentosin fluid and check oil level.
Subsequent work
Subsequent work for installing intake distributor
1. Install tuning pipe.
2. Install air cleaner housing.
3. Connect the battery.