911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-726006.png)
18. Pull/push heater/air-conditioning unit as far as possible in direction of passenger's seat.
19. Remove heater/air-conditioning unit from passenger compartment via passenger's door.
Installing heating/fresh air unit
INFORMATION:
-
Do not remove the plugs until just before installing the expansion valve.
-
Check the condition of foam parts for damage; if in doubt replace.
1. Insert heater/air-conditioning unit in the vehicle over the passenger's side.
2. Lift heater/air-conditioning unit over the centre console and position under dashboard bracket.
