911 Carrera Cabriolet (997) F6-3.6L (2007)
13. Position bracket -2- and secure with the fastening screw -1-.
Tightening torque: 9.7 Nm (7.5 ftlb.)
14. Tighten fastening nuts -1- close to the plenum panel.
Tightening torque: 23 Nm (17 ftlb.)
15. Tighten fastening screw -1- on bracket for heater housing -2-.
Tightening torque: 3.5 Nm (2.5 ftlb.)
16. Secure main wire harness using new tie-wraps -1-.