911 Carrera Cabriolet (997) F6-3.6L (2007)
Headlamp Control Module: Service and Repair
Removing and Installing Control Unit For Gas Discharge
Removing And Installing Control Unit For Gas Discharge
Removing control unit for gas discharge
Removing cap of main headlight
1. Unscrew four fastening screws -1 - from the cap.
2. Release cap once at the top and twice at the bottom -a- and remove from the main headlight.
Removing control unit for gas discharge
1. Unscrew the fastening screw -2- for the coil and pull the coil -3- out of the cap.
2. Unscrew the two fastening screws -1- and remove the control unit.