911 Carrera Cabriolet (997) F6-3.6L (2007)
Variable Valve Timing Solenoid: Service and Repair
WM 153719 Removing and installing solenoid hydraulic valve (camshaft timing)
Removing hydraulic valve for camshaft timing
Removing hydraulic valve for camshaft timing
Caution: Risk of oil contamination and blocked oil bores
^
Faulty engine parts, engine damage
-> Absolute cleanliness is essential when working on hydraulic valves.
Note: The rear silencer must be removed and the holder must be detached before the hydraulic valve on cylinder side 4 - 6 can be removed.
1. Cylinder side 4 - 6 only: Remove rear silencer.
2. Cylinder side 4 - 6 only: Remove holder for rear silencer. Unscrew two M8 x 30 Torx screws on the intake side and two M8 x 25 screws on the
exhaust side and remove the holder.