911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-405004.png)
INFORMATION:
-
Grease the thread of the oxygen sensors that will be fitted again with Optimol Optimoly Paste MF.
-
Replace sealing ring. If this is not possible, the "old" oxygen sensor must be tightened to 50 Nm (37 ftlb.).
1. Install oxygen sensor behind catalytic converter. If the sensor ahead of the catalytic converter was also removed, install this as well.
2. Lay oxygen sensor cable carefully and connect cable plug.
3. Install air cleaner housing.
