911 Carrera Cabriolet (997) F6-3.6L (2007)
Removing sensor for centre airbag
1. Disengage floor covering at the support and lay it in the vehicle interior.
2. Unlock locating peg -1- using the removal tool
3. Unscrew fastening screws -2- and nuts -3- and carefully pull the support up and out of the retaining points.
Incorrect triggering of airbag modules. Refer to Removing and installing airbag sensor - general warnings
4. Unscrew the two fastening nuts -2-.
5. Unlock electrical connector -A- and remove sensor.