911 Carrera Cabriolet (997) F6-3.6L (2007)
Seat Occupant Classification Module - Air Bag: Service and Repair
Calibrating AWS Control Unit
Calibrating AWS Control Unit
Calibrating AWS control unit
NOTE: A system test can only be performed successfully if:
-
There are no faults in the AWS and airbag control unit.
-
Calibration applies to vehicles as of MY '06 with country equipment (USA, Canada, Mexico).
-
Follow the instructions on the Tester.
Later versions of the software may display slightly different text or require a slightly different procedure. The instructions you receive from the tester
itself take precedence over this description.
WARNING: Incorrect information for the AWS control unit
-
Passenger's airbag is triggered incorrectly
-
Calibrate the AWS control unit if the passenger's seat was removed and re-installed, or if the seat bracket or AWS control unit was replaced.
-
Do not loosen the safety screws on the AWS sensors or seat frame.
-
Only replace retainer plate for seat adjustment motor on vehicles without AWS sensors.
-
Always replace the retainer plate together with the seat frame on vehicles with an AWS sensor.
WARNING: Sudden voltage interruption of the power supply to the control module.