911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-52001.png)
Steering Angle Sensor: Removal and Replacement
WM 456019 Removing and installing steering-angle sensor for PSM
Information
The steering-angle sensor is integrated into the steering-column switch. The steering angle is recorded in the airbag contact unit (spring).
Only replace the steering-angle sensor together wish the airbag contact unit (spring) and electronic unit.
A - Direction indicator switch
B - On-board computer switch
C - Wiper switch
D - Cruise control switch
E - Airbag contact unit (spring)/steering-angle sensor
F - Electronic unit
Preliminary work
1. Remove airbag unit.
2. Remove steering wheel.
Caution: Malfunction
^
Fault in airbag contact unit (spring)!
-> Airbag contact unit (spring) must not be twisted.
1. Remove steering-column panels.