911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-572004.png)
3. Insert the generator into the engine area -C-, then push upwards -B- and lift over the bracket -A-.
4. Position vacuum unit over the generator and screw it down with the fastening screws -3-. - Tightening torque: 9 Nm (6.5 ftlb.)
5. Secure the generator with the two fastening screws -1, 2-. - Tightening torque: 46 Nm (34 ftlb.). - Tightening torque: 46 Nm (34 ftlb.)
Subsequent work
Subsequent work - three-phase generator
Connect battery.
