911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-589002.png)
3. Place the fuse element -3- into position, fit the washer -2- and secure with the fastening nuts -1-. Tightening torque: M6>>8 Nm (6 ftlb.)
Tightening torque: M8>>15 Nm (11 ftlb.)
4. Insert the blue cover in power distributor and clip in place.
5. Close the power distributor until the lid is felt to engage and seal with the red seal label.
Subsequent work
Subsequent work for fuse element
Install power distributor.
