porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Installing Wire Harness For Airbag|Page 3173 > < Installing Wire Harness For Airbag|Page 3171
Page 10
background image

10. Loosen ground point under the passenger's seat -54-.

10.1. Screw off fastening nut and remove ground straps.

11. Unclip wire harness at door sill.
12. Release and disconnect plug connection between main wire harness and wire harness for door, left and right -59 and 60-.
13. Release and pull off connector for gateway control unit -65-.
14. Release and pull off connectors for KESSY/PAS control unit -66 and 67-.
15. Release and pull off connector for stop light switch -68-.
16. Release and pull off connector for pedal sensor -69-.

17. Loosen ground point under the unit carrier -76-.

17.1. Screw off fastening nut and remove ground straps.

18. Release and pull off connector for tilt sensor control unit -77-.

Installing Wire Harness For Airbag|Page 3173 > < Installing Wire Harness For Airbag|Page 3171