porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Installing Wire Harness For Airbag|Page 3181 > < Installing Wire Harness For Airbag|Page 3179
Page 18
background image

6. Clip in length compensation at the steering column.

6.1. Position length compensation at the steering column and fasten with the expansion rivet.

7. Fasten ground points on dashboard bracket.

7.1. Fit ground straps and tighten with fastening nuts. Tightening torque: 9 Nm (6.5 ftlb.)

8. Push on connector for antenna amplifier, left and right -89 to 93-.

9. Remove protective film of adhesive strip on main wire harness -area A- and affix main wire harness to A-pillar.

10. Clip in main wire harness at front of roof frame.

Installing Wire Harness For Airbag|Page 3181 > < Installing Wire Harness For Airbag|Page 3179