911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-614022.png)
2. Pull off connector on fuse box for fan -2-.
2.1. Unclip fuse box for fan -Arrow A- and lift up and off -Arrow B-.
2.2. Release lid -arrows- and open -Arrow C-.
2.3. Pull off connector on fuse box for fan -Arrow D-.
3. Loosen ground point left -11-.
3.1. Screw off fastening nut and remove ground straps.
4. Release plug connection between main wire harness and front-end wire harness, left -12- and disconnect. Unclip connector socket.
5. Release connector on hydraulic unit -13- and pull it off.
6. Release connector on brake fluid sender -14- and pull it off.
7. Release connector for tyre pressure monitoring system control unit -15- and pull it off.
8. Unclip wire harness for front end control unit -arrow-.
