911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-614039.png)
14.2. Push in upper electric plug connection at heater/air-conditioning unit until it engages securely.
14.3. Push in lower electric plug connection at heater/air-conditioning unit until it is felt to engage.
15. Push on connector for tilt sensor control unit -77- until it engages securely.
16. Fasten ground point under the unit carrier -76-.
16.1. Connect ground straps and tighten with the fastening nut. Tightening torque: 9 Nm (6.5 ftlb.)
17. Push on connector for pedal sensor -69- until it engages securely.
18. Push on connector for brake light switch -68- until it engages securely.
19. Push on connectors of KESSY/PAS control unit -66 and 67- until they engage securely.
20. Push on connector on Gateway control unit -65- until it engages securely.
21. Push together plug connection between main wire harness and wire harness for door at the left and right -59 and 60- until they engage securely.
