911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-661007.png)
3. Disconnect pressure line -1- at the hydraulic pump. When undoing the pressure line -1- (a/f 16 mm) counter at the connection piece (a/f 27 mm).
4. Remove hydraulic pump.
4.1.
Unscrew three Torx screws -2-.
4.2.
Unscrew one Torx screw M8 x 12 mm on the rear, rear fastening point -3-. Remove hydraulic pump.
Installing hydraulic pump
1. Place the hydraulic pump assembly -1- with reservoir -2- into the vehicle.
