911 Carrera Cabriolet (997) F6-3.6L (2007)
4.1.
Check seals on the oil mist separator and replace if necessary. Move oil separator into installation position and connect all connections
-arrows-.
4.2.
Lightly rub Optimol MP3 onto the sealing rings sealing the crankcase -arrow-. Press oil separator into the crankcase bore by turning carefully.
4.3.
Fit both side fastening screws -arrows-.
Subsequent work
1. Fit air-conditioning compressor.
1.1.
Fit air-conditioning compressor to engine housing with the rear fastening screws and screw down with the three fastening screws -1-.