911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-673008.png)
--> Tightening torque: 10 Nm (7.5 ftlb.)
7. Install speed sensor -2-.
The bore for fitting the speed sensor must be perfectly clean and should be greased with Molykote Long-term 2 plus.
--> Tightening torque: 10 Nm (7.5. ftlb.)
Fasten combination wire -1- to wheel bearing housing.
--> Tightening torque: 10 Nm (7.5 ftlb.)
Connect electric connectors for combination wire for ABS and brake pad wear indicator and lock using a safety clip. Secure line for brake pad
wear indicator on wheel carrier support.
8. Slide protective sleeve of the parking-brake cable -2- onto the guide tube -1- on the underbody. Ensure it is seated correctly!
9. Fit (engage) the parking-brake cable on the parking-brake lever.
10. Check parking-brake shoe setting and adjust if necessary. The parking-brake cable is adjusted automatically by operating the parking-brake lever
several times in succession (self-adjusting).
