911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-679002.png)
2. Unscrew the two fastening nuts -1- and remove the cover -2-.
3. Unclip control unit from the support and pull it out and down.
4. Release -A- and pull off electric connector.
Installing PASM control unit
Installing PASM control unit
1. Connect the electric plug connection until the plug clicks into place.
2. Push in control unit into the support and clip it in.
3. Fit cover -2- and secure with the two fastening nuts -1-.
