911 Carrera Cabriolet (997) F6-3.6L (2007)
Note
Fill only with ATF approved by Porsche. See Spare Parts Catalogue.
Note
Hot vehicles should cool down before beginning the activity.
Note
Vehicle must be horizontal in order to be filled and checked.
Technical values
Preliminary work
Preliminary work
1. Raise the vehicle at the prescribed jacking points.
2. Remove the underbody panels.
3. Place oil collection pan under the transmission.
Draining ATF
Caution
Oil fill level too low
^
Risk of damage to components
--> Do not start engine.
--> Do not tow the vehicle.
Warning
Danger of scalding and chemical burns from hot ATF
--> Allow ATF to cool down
--> Wear personal protective gear (goggles, gloves)
1. Unscrew the drain plug -1- and drain the ATF.
2. Replace sealing ring for drain plug and tighten screw. --> Tightening torque: 22 Nm (16 ftlb.).
Removing ATF pan
Removing ATF pan
1. Remove cross member.