911 Carrera Cabriolet (997) F6-3.6L (2007)
Seals and Gaskets: Service and Repair
Removing and Installing Torque Converter Sealing Ring
WM 324719 Removing and installing torque converter sealing ring
Information
Notes
Note
When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
Note
Before installing the torque converter, check the hub for scoring. If damaged, the converter must be replaced.
Preliminary work
Preliminary work
1. Remove transmission.
2. Put transmission in horizontal position.
Removing the torque converter
1. Pull out fixing pin 95951 (long) from transmission housing.