911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-509002.png)
4. Unscrew fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and loosen
fastening screw.
5. Press wheel carrier downwards and pull out halfshaft flange.
Installing short halfshaft flange
Installing short halfshaft flange
1. Push halfshaft flange into transmission.
2. Screw in fastening screw for halfshaft flange. To do this, screw two drive shaft screws into the halfshaft flange for countering purposes and tighten
fastening screw.
3. Screw in and tighten fastening screws for upper control arms.
