911 Carrera Cabriolet (997) F6-3.6L (2007)
/f6-3.6l/Page-518003.png)
Installing sealing ring for input shaft
Installing sealing ring for input shaft
1. Push assembly sleeve 9255 onto the toothing of the input shaft.
2. Fill the sealing ring between the dust and sealing lips with grease (e.g. Liqui-Moly).
3. Drive in sealing ring with pressure piece 9628 as far as the mounting face.
4. Fit guide sleeve and apply a thin coat of Optimol MP3.
5. Grease splines of the transmission input shaft with Longtime 3 EP.
