911 Carrera S Cabriolet (997) F6-3.8L (2007)
Parts List:
Tools:
Needle-nose pliers -- Carpet knife
Side cutters -- Socket-wrench insert, a/f 10 mm
PIWIS Tester P 9718 -- Phillips screwdriver (medium)
Changeover ratchet, 3/8-inch with extension
Torque wrench Nr.90 Pos.1
ATTENTION
Damage to audio systems
-
due to voltage spikes
--> Before unplugging/removing an audio system, remove ignition key and switch off the audio system.
Work Procedure:
1. Preparatory work.
1.1
Remove luggage compartment cover. --> Workshop Manual 703019 Removing and installing luggage compartment cover - section on
"Removing"'
1.2
ONLY for vehicles with Tire Pressure Monitoring control unit:
Remove fastening screw on Tire Pressure Monitoring control unit and lay control unit to one side. --> Workshop Manual '443419 Removing
and installing Tire Pressure Monitoring control unit-section on "Removing"'
1.3
ONLY for vehicles with luggage compartment cooling:
Remove air guide from front panel.
ATTENTION
The optical waveguide can become damaged due to incorrect installation or if the requirements for handling optical waveguides are not
followed.
--> Observe the requirements for working with optical waveguides --> Workshop Manual '977211V Optical waveguide - MOST bus'
2. Install optical waveguide.
2.1
Remove connection point holder.