911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-698004.png)
5. Use a plastic welder -1- TRIAC S plastic welder WE WE1120 to heat up the fastening pins -2- for the cover until visco-elasticity is achieved.
6. Use an 8-mm round stock -1- to press the fastening pins -2- in evenly on the door trim panel.
Subsequent work
1. Fit door handle.
2. Install door trim panel.
3. Install trim panel for mirror triangle.e
