911 Carrera S Cabriolet (997) F6-3.8L (2007)
Convertible Top Deck Lid Seal: Service and Repair
619319 Removing And Installing Seal For Convertible-top Compartment Lid
Removing seal for convertible-top compartment lid
1. Move convertible top to position shown in the illustration.
2. Pull seal for convertible-top compartment lid off the flanges at the side panels -Arrows A- and at the corner pieces -Arrows B- , as well as off the
flanges connecting to the engine compartment bulkhead -Arrows C- .
Removing seal for convertible-top compartment lid
Installing seal for convertible-top compartment lid
Note:
-
Before replacing, check the existing seal for signs of damage (areas torn, crushed, etc.). If there are signs of damage, the seal must be replaced.
-
The seal is pressed onto the flange without any additional sealants.
1. Lay seal for convertible-top compartment lid evenly along the flange. Position and press the seal without tension onto the flanges at the side panels
-Arrows A- , at the corner pieces -Arrows B- and onto the flanges connecting to the engine compartment bulkhead -Arrows C- .