911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-806011.png)
2. Unscrew the two fastening screws -2- and remove motor for front vertical adjustment -3-.
3. Pull drive shaft -1- out of the gear mount -2- and check for damage.
Installing motor for front vertical adjustment
1. Insert the drive shaft -1- into the gear mount -2- by twisting slightly.
2. Push motor for front vertical adjustment -3- onto the drive shaft by twisting slightly and secure with the two fastening screws -2-. Tightening
torque: 7 Nm (5 ftlb.)
3. Attach connector -1- to motor for front vertical adjustment -3- until it engages firmly.
