911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-806014.png)
2. Push motor for rear vertical adjustment -3- onto the drive shaft by twisting slightly and secure with the two fastening screws -2-. Tightening
torque: 7 Nm (5 ftlb.)
3. Attach connector -1- to motor for rear vertical adjustment -3- until it engages firmly.
Subsequent work
Install front seat.
Removing and Installing Motor For Seat Adjustment
728719 Removing And Installing Motor For Seat Adjustment
Preliminary work
Remove front seat.
Removing motor for seat adjustment
