911 Carrera S Cabriolet (997) F6-3.8L (2007)
Bedding in the brake pads
New brake pads require a bedding-in period of approx. 200 km. Only then do they achieve their maximum braking effect. The slightly reduced
braking effect must be compensated for by increased pressure on the brake pedal. The same also applies after a brake disc change.
Subsequent work
Fit wheel.
Removing and Installing Rear PCCB Brake Pads
Removing and installing rear PCCB brake pads
Information on PCCB brake pads
Since the production launch, Pagid P40-2 brake pads with -brake-piston damping plates- have been fitted on the rear axle for PCCB brakes.
Damping plates in brake pistons
With the introduction of modified brake pads - Pagid P40-3 - the brake-piston damping plates are no longer used.
Some brake-piston damping plates are no longer used