911 Carrera S Cabriolet (997) F6-3.8L (2007)
basically be divided into two areas of wear: outer wear areas and the central wear area.
The natural balance between stronger and weaker braking ensures that in almost all cases the typical wear profile of a perforated (cross-drilled) brake
disc (friction plate) arises.
This means that the inner and outer smooth friction edge area is most worn.
Outer wear areas
Central wear area
-
Measuring brake disc thickness
Information
Unlike smooth brake discs, on which the minimum thickness is measured in the middle of the disc, the minimum thickness of perforated (cross-drilled)
brake discs must always be measured on the inner and outer friction surface track that is most worn -arrows-.
Wear areas A and B
-A- Central wear area
-B- Outer and inner wear area
Measure the brake disc thickness -X- in the area of the outer or inner friction surface track -arrows-, at a minimum of 3 different points (-A, B, C-)