911 Carrera S Cabriolet (997) F6-3.8L (2007)
Coolant hoses for radiator
Connect coolant hoses -1- to the coolant connection piece and secure with spring clamps -arrows- on the Henn couplings.
Make sure that the Henn coupling locks with an audible click.
5. Install the transverse strut.
Fit transverse strut -1- and screw in and tighten M6 hexagon-head bolts -2-.
-
Tightening torque: 10 Nm (7.5 ftlb.)
Transverse strut for wheel housing
Subsequent work
1. Secure air-conditioning condenser on the side radiator.
1.1.
Insert air-conditioning condenser into the side brackets.
1.2.
Screw in and tighten one tapping screw between the air-conditioning condenser and side radiator.
2. Install the air guide in front of the radiators.
3. Fill in coolant.
4. Install the front apron.
5. Install front wheel housing liners.
6. Install front wheels.
Use special tool socket-wrench insert P300 to install the front wheels.