911 Carrera S Cabriolet (997) F6-3.8L (2007)
Fitting position of staking tool for cylinder bank 4-6
1 - Staking tool
2 - Staking guide
15. Fit special tool staking tool 9772 -1- on the cylinder head and camshafts.
15.1.
Secure on the cylinder head with four M6 x 25 screws -2-. Tighten screw slightly with your hand.
Staking tool screws for cylinder bank 4-6
16. Tighten adjusting screw -arrow- on the staking tool to the specified torque by turning it clockwise.
Tightening adjusting screw on staking tool
-
Tightening torque: 10 Nm (7.5 ftlb.)
17. Turn the crankshaft clockwise (running direction of engine) to the TDC marking at the vibration damper.
17.1.
This position is marked TCD 1/4 on the surface.
17.2.
Fix in place using a long locating pin 9595/1 -1-.