911 Carrera S Cabriolet (997) F6-3.8L (2007)
U 1/4 marking on vibration damper
Warning
Preloaded or pressurized components
^
Risk of eye injuries
^
Risk of bruising
-
Wear personal protective gear.
-
Secure components to prevent them from falling off suddenly.
Information
^
Special tool disassembly tool 9764 for removing piston-pin circlips must only be turned in a clockwise direction.
^
Always hold the tool firmly with one hand when using it.
^
Replace removed piston-pin circlips.
3. Slide special tool disassembly tool 9764 through the assembly bore. The groove for the hook on the circlip -arrow- must be at 9 o'clock position
when the engine is positioned vertically.
Groove position for circlip hook (9 o'clock)
4. Disassembly tool 9764 must now be pushed into the circlip.
Positioning groove of special tool 9764 in hook on circlip