911 Carrera S Cabriolet (997) F6-3.8L (2007)
Crankshaft Main Bearing Seal: Service and Repair
Removing and Installing Crankshaft Sealing Ring (PTFE) - Flywheel Side
Removing and installing crankshaft sealing ring (PTFE) - Flywheel side
Preliminary work
Preliminary work for crankshaft sealing ring on flywheel side
Information
^
In Tiptronic vehicles, the complete engine/transmission unit must be removed.
^
In vehicles with manual transmission, the sealing ring can be changed on the engine, irrespective of whether it is installed or removed.
Manual transmission:
1. Remove manual transmission.
2. Remove clutch.
3. Remove dual-mass flywheel.
Tiptronic transmission
4. Remove engine.
5. Remove Tiptronic transmission.
6. Remove drive plate for converter.