911 Carrera S Cabriolet (997) F6-3.8L (2007)
2. Release the electrical -a- and pull off.
Installing air-conditioning system regulator
1. Insert electrical plugs in the air-conditioning system regulator until they are felt to engage.
2. Slide the air-conditioning system regulator into the installation slot until it clicks into place.
Subsequent work
Subsequent work for the air-conditioning system regulator
1. Install left and right side cover for centre console.
Coding air-conditioning regulator
Coding the air-conditioning control
INFORMATION:
-
If the control unit for the air-conditioning control is replaced, it must be programmed using the PIWIS Tester 9718. This is to adapt the control
unit to the vehicle and equipment.
-
During coding, it is essential to guarantee the power supply for the PIWIS Tester 9718. It is essential to connect a battery charger with a current
rating of at least 40 A to the vehicle battery.
-
The PIWIS Tester 9718 instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. Deviations
may occur with later software versions.
-
The procedure described here has been structured in general terms; different text or additions may appear in the Porsche System Tester.