911 Carrera S Cabriolet (997) F6-3.8L (2007)
-
Check the condition of foam parts for damage; if in doubt replace.
1. Insert heater/air-conditioning unit in the vehicle over the passenger's side.
2. Lift heater/air-conditioning unit over the centre console and position under dashboard bracket.
3. Position holder for the B+ line on the heater/air-conditioning unit and tighten with the fastening screw -7-. - Tightening torque: 1.7 Nm (1.5 ftlb.)
4. Lay electric line from vehicle wire harness to heater/air-conditioning unit wire harness and fix with a tie-wrap.