911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-521003.png)
3. Fit new fastening screw for the supply tank -arrow- on the intake-air distributor. Provided the screw is not micro-encapsulated, secure with Loctite
262 (at the thread) to prevent it undoing. - Tightening torque: 10 Nm (7.5 ft. lbs.)
Supply tank fastening screw
Subsequent work
1. Install throttle housing.
2. Install air cleaner housing.
3. Fill hydraulic fluid (Pentosin) into the supply tank, bleed the steering system and check for leaks.
Checking fluid level
