911 Carrera S Coupe F6-3.6L SOHC (1998)
13. In this case, it is first necessary to identify and delete the stored "radio code" of the lost hand-held transmitter.
The remaining hand-held transmitters are required for this purpose.
-
Press the locking button on the hand-held transmitter and then insert the vehicle key into the ignition lock, switch on the ignition and
re-establish communication with the control module. Current radio key shows the "radio code" of the vehicle key that is presently inserted in
the ignition lock.
-
Compare this radio code with the radio codes at positions 1 to 4. This comparison allows the position of the lost hand-held transmitter (radio
code) to be identified, as one "radio code" is ultimately left over at positions 1 to 4.
-
Insert the vehicle key equipped with the new hand-held transmitter into the ignition lock and switch on the ignition.
-
Establish communication with the control module.
-
Select the identified position using the arrow keys and delete the radio code with the [F3] key.
-
Then press the [F8] key.
14. Carefully input the 24 digit code number with the arrow keys and press the double arrow key [>>].
The following message appears on the screen: "Please confirm input".
15. Check the input and press the [F7] key. Now the handheld transmitter is taught.
16. Go back to the menu item Learning function, remove the key and switch on the ignition again.
Once the key has been removed again, the hand-held transmitter is ready for use.
17. Check handheld transmitter for operation.
