911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
Important:
The seal of the roof trim strip must contact the window frame seal (arrow A in Figure 21). A gap in this area will create wind noises!!! Position the
seal to the front and remove any excess glue.
-
The roof rail trim strip must only be cleaned with mild soap and water.
-
Place the wind deflector lever into the forward position and remove the special tool 9587.
-
Reinstall the wind deflector and adjust.
-
Road test the vehicle.
Technical Service Bulletin # 69601
Date: 960321
Vehicle - Water Entry
Group
6
Number
9601
Model
6 Cyl.
Part Identifier
60xx
March 21, 1996
Subject:
Possible Water Entry Areas on Targa Vehicles
ATTENTION:
Service Manager / Service Technician
Models Affected:
911 Targa, Model Year 1996
General Information:
The following information contains procedures relating to the repair of water leaks in the 1996 911 Targa. After finish production each Targa model is
comprehensively tested for water leaks. However, should a customer complain of water leaks, the procedures in this information can be used for repairs.
