911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
-
After the rear wall trim panel is removed, remove the covers for the roof rail trim panels (Figure 26, arrow A).
-
Install a foam or felt strip, approximately 50 mm x 10 mm, 2 to 3 mm thick on the top edge of the cover for the roof rail trim panel pointing toward
the guide rail (Figure 26, arrow B).
Area #9
Creaking noises in the area of the outside roof rail trim strips (left or right sides).
Possible cause:
-
The roof rail cover strips are installed under tension.
Repairs:
-
Remove the wind deflector and fully open sliding roof.
