porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Targa Roof - Noises|Page 4593 > < Targa Roof - Noises|Page 4591
Page 3
background image

1.1

Loose bolts or threaded inserts (Figure 1, arrow 1). Replace loose bolts and torque to 5.5 + 0.5 Nm (4 ft/lb).

Note

As of January 20, '97 the bolts were replaced with torx bolts, part number, 993 562 577 01. Only this bolt is valid for repairs. If the threaded
inserts come loose (Figure 1, arrow 1), the wind deflector, part number, 993 562 904 00 and the bolts should be replaced.

1.2

Sliding elements in the hinge link binding. Replace sliding elements (Figure 2, arrow 2). With the wind deflector removed, replace both sliding
shoes, part number, 993 562 563 00. Lubricate with silicone spray.

1.3

Eliminate the play of the wind deflector drive cables.

-

Remove rear wall trim panel

-

Open wind deflector with switch

-

Remove the left motor (Figure 3, pos. A) for the wind deflector and the glass sunroof panel from the rear panel (arrows).

-

On the right motor (Figure 3, pos. B) lift the red plastic driver (Figure 3, arrow).

Targa Roof - Noises|Page 4593 > < Targa Roof - Noises|Page 4591