911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
Parking Brake Shoe: Service and Repair
Removing and Installing Parking Brake Shoes
Removal
1. Take off rear wheel. Remove brake caliper from wheel carrier and suspend in wheel housing (do not open hydraulic brake system).
2. Engage a screwdriver into the hole in the brake disc and turn adjuster in "slackening" direction. Lift off brake disc after removing countersunk
screw(s).
3. Remove compression springs (No.2), adjuster (No.3/4) and return spring (No.5). Remove parking brake shoes and return spring (No.6).
Installation
1. Apply a thin coat of grease to adjuster (No.3/4), operating lever pin (spreader lever) and sliding surfaces of parking brake shoes.
2. Install operating lever (spreader lever), brake shoes, return springs, compression springs and adjuster.
Note