porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Heater Pipe (In Engine Compartment) - Revised|Page 4007 > < Expansion Valve|Specifications|Page 4002
Page 1
background image

Heater Hose: Technical Service Bulletins
Heater Pipe (In Engine Compartment) - Revised

Group 

8

Number 

9604

Model 
6 Cyl.

Part Identifier 

8068

September 26, 1996

Subject: 
Heater Pipe in Engine Compartment

ATTENTION: Service Manager / Service Technician

Models Affected: 

911 Carrera M.Y. 1995 and 1996
911 Carrera 4 M.Y. 1995 and 1996
911 Carrera 4S as of M.Y. 1996

Concern: 

The one piece engine compartment heater pipe is now replaced by a two piece pipe.

General Information: 

To promote easier installation, the former version heater pipe (1A in Figure 1) is now replaced with a two piece version (1 & 2 in Figure 1).

Additional changes to related parts also include shortening of the slots in the connecting socket (4 In Figure 1) by 5 mm and lengthening of the rubber
seal (3 in Figure 1) by 5 mm. The introduction of the two piece pipe along with the additional changes took place in stages during production:

-

Two piece pipe installed as of November 21, 1995 production. 

-

Connecting socket slots shortened by 5 mm as of December 20, 1995 production.

-

Rubber seal lengthened by 5 mm as of February 16, 1996 production.

Parts Information: 

Heater Pipe (In Engine Compartment) - Revised|Page 4007 > < Expansion Valve|Specifications|Page 4002