911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
5th Gear Replacement With Transmission Installed (Part 4 Of 4)
Removal Notes
1. Remove engine guard and rear underside panel.
2. Drain transmission oil.
3. Remove crossbrace.
4. Disengage shift rod coupling from inner shift rod.
5. Support transmission on general-purpose transmission jack and unbolt transmission support from body.
6. Lower engine-transmission assembly only so far that the assembly will not rest on the stabilizer bar.
7. Determine installation position of reverse shift fork for reinstallation, measuring dimension "A" with depth gauge.
Installation Notes
1. Tighten hexagon head nuts of drive pinion and input shaft to specified torque and lock the nuts.
2. Adjust reverse shift fork to the dimension "A" determined during removal and check adjustment.